|

|
DataShare x2 - CD DVD Server - Datasheet
Hardware
Networking Enviroments
System Management & Disaster Recovery
Physical/Electrical
|
|
Hardware: |
Controller:
- 512MB PC-133 system memory, 16MB DOM (disk on module) for operating system.
- Dual Gigabit Ethernet (10/100/1000mb) Network Interfaces standard
- Load balancing, link aggregation, fault tolerance, and stand-alone modes available.
- Back-lit LCD keypad and display for setting IP address during install and monitoring status/events.
- Audible buzzer alarm for critical events.
- Network Interface LED's to indicate link speed and traffic.
CD/DVD loading and recording devices:
Up-to 2 physical CD/DVD devices per server. Up-to 1500 volumes cached on-line.
- DVD-ROM (reads CD-ROM, DVD-ROM, CD-RW, DVD-RW/DVD+RW media)
- DVD-RW/DVD+RW (writes CD-R/CD-RW, DVD-RW/DVD+RW)
- CD/DVD file systems supported: ISO 9660 level 1, 2 and 3 (including Romeo, Joliet, and Rock-Ridge extensions), HFS/HFS+, UDF (for both CD and DVD), High Sierra, Hybrid ISO+HFS, and multi-session CD’s. Note: Audio CD’s are not supported. Hollywood-style DVD movies, or any movie DVD with copyright encryption, are not supported
HDD storage devices and RAID:
Up-to 8 physical hard disk drives per server, up-to 2TB volume capacity.
- Hot-swappable intelligent disk drive backplane module.
- Serial ATA disk drive technology, capacities up-to 250GB per drive
- RAID level 0, 1 and 5 supported, with optional global hot-spare.
- Up-to (4) concurrent RAID arrays.
- Dynamic RAID 5 expansion scalable up-to 2TB capacity (varies by model).
Event Monitoring and Environmental:
- LCD console and keypad displays critical system events.
- RS-232 DB9 serial interface for connecting to APC SmartUPS for controlled shutdowns.
- Network UPS (RFC-1628) for connecting to most UPS's for controlled shutdown over network.
- Sensors: CPU temperature, fan speed, power voltages, and disk drive health.
- Customizable email notification of critical events
|
| Networking Enviroments: |
Microsoft Network Server Support:
- Servers: NT 4, Windows 2000, Windows 2003
- Domain: NT 4, Windows 2000 and Windows 2003 Active Directory Services (mixed mode and native mode supported)
- Directory: Windows 2000 and Windows 2003 Active Directory Services (mixed mode and native mode supported)
- Trusts: User authentication is possible from any domain with a trust relationship to the domain in which the DataShare x2 is installed
- Security: Granular File-level / User-level / Share-level security controlled via administration web GUI, Native Windows Security via Windows Explorer
- Authentication: NTLM v1 and NTLM v2 supported
Microsoft Network Client Support:
- Clients: Windows 95/98/Me, XP, NT 4, 2000, 2003
- Protocols: CIFS / SMB, HTTP, FTP
- Security: Granular File-level / User-level / Share-level security controlled via
administration web GUI, Native Windows Security via Windows Explorer
Novell NetWare Network Client Support:
- Protocols: NetWare NCP over IPX support*
* Limited security support, no NDS/eDirectory support.
Apple Macintosh Client Support:
- Clients: OS 8.x, 9.x, OS X 10.x
- Protocols: Appletalk, AFP over IP
- Authentication can be passed to a NT Domain or 2000 Active Directory
Unix Network Server Support:
- Authentication: NIS support
- NIS users and NT users can be automatically mapped to the same ID's in the internal DataShare x2 user database
- Security: Traditional NFS Security, controlled by root-user
Unix Network Client Support:
- Clients: Most Unix/Linux variants capable of NFS v3
- Protocols: NFS v3 over UDP or TCP, HTTP, FTP
Web Browser (HTTP):
- Internet Explorer 5 or above
- Administrative tools and server setup accessed via HTTP
- Users can log in and authenticate via a NT Domain or 2000 Active Directory, as well as local-database
- SSL 3.0 (HTTPS) connections supported over Internet Explorer 5.0 or above for both users and administrators
File Transfer Protocol (FTP):
- Users can log in and authenticate via a NT Domain or 2000 Active Directory, as well as local-database
|
| System Management & Disaster Recovery: |
-
Most network backup platforms supported such as Microsoft Backup, and Legato Networker.
-
Available locally attached tape backup supports AIT tape devices (IDE) with built-in scheduler.
-
Email notification and SNMP traps for monitoring events.
-
Operating system stored in non-volatile DOM (disk on module), reducing chance of failure.
-
Automatic background hard drive scanning can be scheduled to seek out potential drive problems before they become serious.
SmartSync FILE REPLICATION and DATA SYNCHRONIZATION:
- Secure data transfer using SSL encryption
- Remap port number for specific firewall protected applications
- Optionally compresses data before transit to minimize network bandwidth
- Network bandwidth throttling, specify unlimited or limit data transfer by KB/sec
(kilobytes per second)
- Optionally retain file permissions and security (ACL’s) on destination
- Optional Include/Exclude file filter wildcard lists
- Choose Quick Sync for a date stamp comparison, or use default CRC-32 method for verifying data changes
- Only transmits data that has changed (delta blocks) to minimize bandwidth
Trend Micro Anti-virus protection (real-time or scheduled):
- Real-time, scheduled, or disable virus scanning
- Automatic virus pattern updates over internet or via uploaded file
- Customizable file extensions to scan/not-scan
- Quarantine support
- Administrator alert of out-dated virus pattern or virus found
- Anti-virus engine is capable of scanning multiple levels of compressed files
- Real-time scanning is supported for all protocols except NFS.
NFS users should use scheduled virus scans
SUPPORTED LANGUAGES:
- Web pages: English, Traditional Chinese, Simplified Chinese, Korean, Japanese,
French, German, Italian, Spanish
- Code-pages: English, western European, Arabic and Hebrew, CJK DBCS, Unicode
INCLUDED SOFTWARE (not required):
- NAStart software easily discovers new DataShare x2's on the network for quick and painless first-time system setup.
- Import/export the configuration settings of your DataShare x2 and save them in a file using NAStart.
- NAStart for remote disc loading, creation or copying.
- eContent for establishing a front-end menu interface to deploy to all users, allowing them to choose from a pre-defined list of applications to launch from DataShare x2. The master list is controlled by the DataShare x2 administrator.
|
| Physical/Electrical: |
- SATA drive support. 48-bit LBA for drive capacities up-to 250GB
- 300,000 hours MTBF
- HDDs enclosed in hot-swappable intelligent backplane modules with cooling fans
- Operating Temperature: +10 to + 35 C
- Relative Humidity: 10-80% @ 30 C non-condensing
- Approvals FCC Class A, cUL, UL, CE, BSMI
Dimensions (HxWxD):
- 1U rackmount: 1.75" x 19" x 21"
- 5-bay tower: 10 ¼" x 8" x 17"
- 9-bay tower: 19" x 8" x 18"
|
|